Guest
Logout
QUICK ACCESS
Strongbelt cursus
Profile details:
SPZ
SPA
SPB
SPC
3V
5V
8V
Wedge Belts DIN 7753/1 / ISO 4184
and USA-Standard RMA/MPTA Version 1:
USA-Standard RMA/MPTA 3V, 5V, 8V Version 2:
DIN 7753 Part 1 / ISO 4184 SPZ, SPA, SPB, SPC Product description Drive belts with tension cord, consisting of rubber coating, base compound and cover fabric Areas of application Version 1:
Design for machines from countries, which use these sections, e.g. USA, Canada.
Heavy duty drives (8V), e.g. grinders, to carry out higher outputs. Version 2:
Desgin for lightly used drives, such as rotary pumps, up to heavy duty machines, e.g. stone crushers Special construction (on request) electrically conductible: The electricaly conductible allows the secure derive of electrostatic charge. If V-belt drives work in rooms where there is a danger of explosion, the belts must be electrically conductive so that there are no sparks. In order to ensure that belts which are listed as being electrically conductive fulfill these requirements, it is absolutely necessary to conduct a check according to ISO 1813. In this check, every single belt is controlled and given a certificate. Oil resistant: The oil resistant cover of the belt protects it from contamination by mineral oil/ grease splash. Contamination by animal or vegetable oil or water solvent cutting oil will reduce belt life. In extreme cases the use of our special construction is recommended. Heat resistant: Standard construction Strongbelt will operate in ambient temperatures up to +70°C/+158°F. Higher ambient temperatures will lead to premature ageing and subsequent belt failure. In this case our special construction XHR is recommended.
and USA-Standard RMA/MPTA Version 1:
USA-Standard RMA/MPTA 3V, 5V, 8V Version 2:
DIN 7753 Part 1 / ISO 4184 SPZ, SPA, SPB, SPC Product description Drive belts with tension cord, consisting of rubber coating, base compound and cover fabric Areas of application Version 1:
Design for machines from countries, which use these sections, e.g. USA, Canada.
Heavy duty drives (8V), e.g. grinders, to carry out higher outputs. Version 2:
Desgin for lightly used drives, such as rotary pumps, up to heavy duty machines, e.g. stone crushers Special construction (on request) electrically conductible: The electricaly conductible allows the secure derive of electrostatic charge. If V-belt drives work in rooms where there is a danger of explosion, the belts must be electrically conductive so that there are no sparks. In order to ensure that belts which are listed as being electrically conductive fulfill these requirements, it is absolutely necessary to conduct a check according to ISO 1813. In this check, every single belt is controlled and given a certificate. Oil resistant: The oil resistant cover of the belt protects it from contamination by mineral oil/ grease splash. Contamination by animal or vegetable oil or water solvent cutting oil will reduce belt life. In extreme cases the use of our special construction is recommended. Heat resistant: Standard construction Strongbelt will operate in ambient temperatures up to +70°C/+158°F. Higher ambient temperatures will lead to premature ageing and subsequent belt failure. In this case our special construction XHR is recommended.